Post Offer Free
Zhejiang KRIPAL Electric Company  

Gold Index: 12966

You are here: home  > Black Manual Mains Rotary Isolator Switch / 100 Amp Disconnect Switch

Black Manual Mains Rotary Isolator Switch / 100 Amp Disconnect Switch 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: UKP1../V/SVB

 
Black Manual Mains Rotary Isolator Switch / 100 Amp Disconnect Switch
 
 
KRIPAL HAS

 
Black Manual Mains Rotary Isolator Switch / 100 Amp Disconnect Switch
 

 
KRIPAL HAS THE DESIGN PATENT FOR THIS SERIES SWITCHES. 

 

 
Description: 
 

Disconnect Switches from KRIPAL are hand-operated switchgear for main circuits with 90° switching angle and are offered as ON-OFF Switches (2, 3, 4, 6 and 8 pole) or as Changeover Switches with centre OFF (2, 3 and 4 pole).
 


Specifications:

 

No.

Tech Parameters

requirement

1.

Rated voltage

below 440V

2.

rated current

10A,16A,20A,25A,32A,40A,50A,63A,80A,100A

3.

frequency

AC50HZ

4.

No. of poles

2P,3P,4P,5P

5.

No. of layers

make as required with circuit diagram

6.

panel size

64*64mm

7.

color of handle

Black/red

8.

Working temperature

-25°C~+40°C

9.

 Working height

 ≤2,000m

10.

 Relative humidity

 ≤50% with highest temperature +40°C,but allow higher humidity with low temperature less than 40°C

(eg.: humidity 90%----teperature20°C)

11.

 Installation conditions

 pollution class III

12.

 Mechanical life

 0.1*106times

13.

 Electrical life

 0.03*106times

14.

 Operative frequency

 120times/hour

15.

 Transform angle

 90°

 


Applications:
 

The switches must be selected according to the following performance specifications:

 

1) According to motor switching capacity, when the switch is fitted in such a way that the operator may use it for operational ON and OFF switching.

 

2) The rating data always applies to 3 poles. When the motor rating is divided between 6 poles, such as for star-delta switching, a 6 pole switch can be used to control 1.73 times

the rated power.

 

3) If the switch has a load-shedding Contact (LA), you can select the appropriate switch according to the uninterrupted current. The load-shedding contact is an auxiliary contact, which s closed in the ON position and opens early when witching off, so that a contactor located in the circuit takes over the switching duty and the maintenance/safety switch

operates at zero load. When switching on, the load-shedding contact closes later than or at the same time as the main contacts. With UKP and UKT switches this is the N/O auxiliary contact.

 

4)The "ON" position can be locked with a padlock (by altering the handle).

This is not permissible for switches with a red/yellow handle.

 

 

Features:

 

• Safety switches are always housed in insulated enclosures and have an inscription saying "Safety Switch" on a bright orange label.

• Switches to be used for emergency stop switching have a red handle and yellow locking collar in accordance with STOP category O (as per IEC/EN 60204/VDE 0113).

• If the switch is not approved for emergency stop switching, both parts will be black ("SW" part no. suffix).

• The cover and handle are interlocked by fitting a padlock.

 

 

Installation:

 

A. front mounting: four pole mounting; single hole mounting;

B. Base mounting: Snap-on mounting (DIN rail 35mm)

C. Enclosed Switches: PC enclosure; stainless steel enclosure

 

 
Optional:
 
a. Netural contacts
 
b. 1NO+1NC module
 
c. Color of handle and surroundings

 

 

UKP is a complete line of load break switches. The rotary switches are compact in size and with a good design. The complete line is based on four frame sizes: available 10 A...100 A,. The standard range also includes direct door-mounted switches, DIN rail mounted switches and surface mounted switches. The wide range of accessories includes additional poles, auxiliary

contacts, handles and terminal shrouds.

 

The large selection of types, switching programmes and mounting forms mean that practical

reliable solutions can be achieved quickly. Whatever the switch, all individual parts are

optimally co-ordinated, easy to assemble and combine.

 

Whether in switching and automation systems, mechanical engineering and construction,

in the heating, climatic and ventilation industry, environmental technology or other areas.

 

KRIPAL switches provide safety!

 

bigPhoto
 Mr. Michael Deng

Tel: 86-571-62865157
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Zhejiang KRIPAL Electric Company [China (Mainland)]


Business Type:Manufacturer
City: Hangzhou
Province/State: Zhejiang
Country/Region: China (Mainland)

You May Like:

Product (266)