Water Pump 3 Wire Cable Float Level Switch , High Temperature Float Switch 3m 5m 10m

Description:

Cable float switch is a device used to detect the level of liquid within a tank. The switch may be used in a 

pump,  an indicator, an alarm, or other devices. 

When used in a typical sump pump application, the float switch is used to turn an electric pump on and off. 

As water enters the reservoir of the sump pump, a plastic float begins to rise. The float is commonly fastened to 

a rigid structure at one end, thereby, causing the float to pivot or roll over as it rises on the water level. 

A micro switch inside of the float switch is connected to an electric pump by wiring that runs through the 

chassis of the pump. Once the proper angle is reached by the float, the ball inside runs to the low side of the

 switch and completes the circuit, allowing electricity to reach the pump motor and begin to pump the water

 out of the basement or structure. Once the water has been pumped out of the reservoir and the float reaches

 its resting level once again, the ball flows out of the switch and the contact is broken within the wiring harness,

 turning off the pump motor. In this design, the float switch is commonly housed in a copper, aluminum or tin

 float canister to prevent rust and deterioration in the submerged position. 

Specifications:

APPLICATION

Used in sumps,Sewage,factory drainage,sludgy & soil water containing suspensions for automatic 

switching of pumps, submerged pumps, solenoid valves, alarms etc.,

Features:

1, Wide appication scope, strong generality

This range of cable float Switch  apply to branch water, sewage, acid-base solution of less than medium concentration oils and situations requiring on pollution (for example food and drinds industry), diesel oil gasification kitchen range, and automatic fuel feeding

2, Easy Installation and convenient adjustment method

Those Float switch can be adjusted at will with the locating piece moving up and down, only one screw is needed to secure the signal cable to finish installation.

3, Stable and durable, no need maintain

Those Float switch can be used for long time after it being installed. Almost no maintenance and repairing problem would happen during it's operation period.

4, Simple construction and reliable performance

Those Float switch can be output stable and reliable switch control signal of making, breaking without