Post Offer Free
Zhejiang KRIPAL Electric Company  

Gold Index: 12966

You are here: home  > Class 10A Manual / Automatic Overload Thermal Relay With AC Contactor

Class 10A Manual / Automatic Overload Thermal Relay With AC Contactor 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: UKH40

 
Class 10A Manual / Automatic Overload Thermal Relay With AC Contactor
 
 
Therm

 

Class 10A Manual / Automatic Overload Thermal Relay With AC Contactor

 

 

Thermal overload relays are protective devices. They are designed to cut power if the motor draws too much

current for an extended period of time. To accomplish this, thermal overload relays contain a normally closed 

 (NC) relay. When excessive current flows through the motor circuit, the relay opens due to increased motor 

temperature, relay temperature, or sensed overload current, depending on the relay type. 

 

These overload relays are similar to circuit breakers in construction and use, but most circuit breakers differ

 in that they interrupt the circuit if overload occurs even for an instant.  Thermal overload relays are conversely 

designed to measure a motor's heating profile; therefore, overload must occur for an extended period before

 the circuit is interrupted.

 

 

Applications:

 

UKH series overload relays apply to circuit of AC 50Hz or  60Hz, rated voltage to below 660V and rated current . 1A-800A for AC motor overload and open-phase protection during long time or intermittent long time service, which can also protect 3-phase serious imbalance and long starting time of motor or long timer operation, can also be used for corresponding AC contactor for electromagnetic starter.

 

 

Specifications:

 

Three-phase Balance Motion Time

 

No

Times of the setting current

Motion time

Start condition

Ambient temperature

1

1.05

>2h

Cold state

20±5oC

2

1.2

<2h

Heat state(Following the No.1 test)

3

1.5

<4min

4

7.2

10A

2s< Tp≤10s

≤63A

Cold state

10

4s< Tp≤10s

>63A


 

Features:

 

1. Direct mounting structure:

  The  thermal overload rela can be mounted directly to the Magnetic Contactors without

   additonal brackets.  (Applied model: UKH-22, 40, 85,100,150,220,630)

 

2. Safety cover

   The finger proof safety cover prevent careless touch of electric conductor

 

3 . Separation of power part and operation part

   The main circuit and the operation part are separately designed and the operation part is commonly used.

 

4 . Easy operation

 

 

Working condition:

 

1.  The installation altitude less than 2000m

 

2.  The surrounding temperature range: from -5°C ~ +40°C

 

3.  In the non-explosive condition. or without adequate erosion and destruction of gas and dust

     conductive area .

 

4.  Without  rain and snow invade 

 

5.  Pollution level 2

 

 

 

bigPhoto
 Mr. Michael Deng

Tel: 86-571-62865157
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Zhejiang KRIPAL Electric Company [China (Mainland)]


Business Type:Manufacturer
City: Hangzhou
Province/State: Zhejiang
Country/Region: China (Mainland)

You May Like:

Product (266)