IP66 IP67 32 Amp Rotary Isolator Switch Disconnector For Solar PV System

Description: 

KRIPAL offers a comprehensive range of isolating switches designed with safety in mind stand-stone and enclosed formats, this switch range are padlockable and availiable in yellow/ red or grey/black making it idea for any electrical isolation requirement, such as repair, maintenance installation and inspection. 

Features:

1) Standard: IEC-60947-3 DC-21B

2) Protection degree: IP66/IP67

3) UV resistance: ASTMD4459

4) Flammability: UL-94VO

5) Mechanical life: 20000

6) Electrical life: 2000 

7) Enclosure color: Grey

8) Handle color: Black / Red

10) Warranty: 3 Years 

11) Extremely short power shut off time of less than 3ms

12) Padlockable handle

13) The isolator has 4 seperate poles
14) Jumpers can be used to change the way that the poles are connected
15) Poles can be connected in series parallel or a variation of both series and parallel
16) Interconnection of the poles dictates the load that the switch can make and break
17) As the mumber of poles used increases so the load switching capacity of the device increases.

Specifications:

Applications:

UKPD25 series DC solar switch disconnetors in plastic enclosure, are apllicable in 1-15KW residential or commercial photovoltaic system, independent with inverter.This model are designed to keep solar more safe, the higest voltage can be reached 1000V.To ensure its stability and long service.

Mouting:

This DC rotary isolator switch can be mounted vertically, horizongtally, sideways and remians its IP66/IP67 protection rating

Instructions:

1. It is important to ensure that all electrical connections(including factory connections) are tight, ensure that

 all terminal screws are tightened firmly.

2. It is recommended that for DC, multi-stranded cable, crimp ferules are used to ensure that the wires do  not become loose,loose cables can cause excessive watt loss and generate excessive heat causing severe

 damage to the switch.

3. After installing and wiring the switch carry out the following test: switch on and off several times making 

sure that a positive snap action can be felt and heard.

4. If the switch cannot be felt and heard to operate correctly then it is important that che switch is not used

FAQ:

1. Samples: provided freely
2. Warranty: 3 years; every item is tested before delivery, professional testing lab in factory
3. ODM, OEM: acceptable; mould tooling is finished in our own mould tooling center

4. Replacement Terms: The faulty items will be replaced freely, once we confirm that they result from poor

 quality or incorrect production. Regarding the delivery of replacements, it is negotiable between two parties.